Subheading
7005.29
Float glass and surface ground or polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked: Other nonwired glass: Other:
7005 Float glass and surface ground or polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked
Duty rates
Column 1, General
Not stated at any level above this lineThe rate for goods from countries with normal trade relations.
Column 1, Special
No programme rate on this lineOnly if the goods qualify under that programme's rules of origin, which is a determination nobody here can make for you.
Column 2
Not stated at any level above this lineFor the small number of countries named in General Note 3(b), which is not held here.
Additional duties
No footnote on this line, or on the lines above it, points at a chapter 99 provision.
These are the published rates for this line. They are not a landed duty. Additional duties under chapter 99, which is where section 232 and section 301 sit, can apply through the U.S. notes to that chapter without a footnote on this line, and those notes are not held here. Classification and country of origin are yours to determine.
Below this
| Code | Description | General |
|---|---|---|
| 7005.29.04 | Suitable for use in liquid crystal displays | Free |
| 7005.29.04.10 | Measuring not over 0.26 m2 in area | Free |
| 7005.29.04.50 | Measuring over 0.26 m2 but not over 0.65 m2 in area | Free |
| 7005.29.08 | Other | 18.7¢/m2 |
| 7005.29.08.10 | Measuring not over 0.26 m2 in area | 18.7¢/m2 |
| 7005.29.08.50 | Measuring over 0.26 m2 but not over 0.65 m2 in area | 18.7¢/m2 |
| 7005.29.14 | Suitable for use in liquid crystal displays, measuring not over 0.8 m2 in area | Free |
| 7005.29.14.10 | Measuring less than 5 mm in thickness | Free |
| 7005.29.14.50 | Measuring 5 mm or more but less than 10 mm in thickness | Free |
| 7005.29.18 | Other | 14.5¢/m2 |
| 7005.29.18.10 | Measuring less than 5 mm in thickness | 14.5¢/m2 |
| 7005.29.18.50 | Measuring 5 mm or more but less than 10 mm in thickness | 14.5¢/m2 |
| 7005.29.25.00 | Measuring 10 mm or more in thickness | 4.9% |
Keep this line
An account can watch this line, so a section 232 or 301 action naming it reopens the determination that rested on it.
2026HTSRev17, retrieved 2026-08-27, from the USITC