Subheading
8481.80
Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof: Other appliances:
8481 Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof
Duty rates
Column 1, General
Not stated at any level above this lineThe rate for goods from countries with normal trade relations.
Column 1, Special
No programme rate on this lineOnly if the goods qualify under that programme's rules of origin, which is a determination nobody here can make for you.
Column 2
Not stated at any level above this lineFor the small number of countries named in General Note 3(b), which is not held here.
Additional duties
No footnote on this line, or on the lines above it, points at a chapter 99 provision.
These are the published rates for this line. They are not a landed duty. Additional duties under chapter 99, which is where section 232 and section 301 sit, can apply through the U.S. notes to that chapter without a footnote on this line, and those notes are not held here. Classification and country of origin are yours to determine.
Below this
| Code | Description | General |
|---|---|---|
| 8481.80.10 | Of copper | 4% |
| 8481.80.10.20 | Bath and shower faucets | 4% |
| 8481.80.10.30 | Sink and lavatory faucets | 4% |
| 8481.80.10.40 | Supply stops | 4% |
| 8481.80.10.50 | Other | 4% |
| 8481.80.10.60 | Gate type | 4% |
| 8481.80.10.70 | Globe type | 4% |
| 8481.80.10.75 | Plug type | 4% |
| 8481.80.10.85 | Ball type | 4% |
| 8481.80.10.90 | Butterfly type | 4% |
| 8481.80.10.95 | Other | 4% |
| 8481.80.30 | Of iron or steel | 5.6% |
| 8481.80.30.10 | Gate type | 5.6% |
| 8481.80.30.15 | Globe type | 5.6% |
| 8481.80.30.20 | Plug type | 5.6% |
| 8481.80.30.25 | Ball type | 5.6% |
| 8481.80.30.30 | Butterfly type | 5.6% |
| 8481.80.30.40 | Other | 5.6% |
| 8481.80.30.55 | Gate type | 5.6% |
| 8481.80.30.60 | Globe type | 5.6% |
| 8481.80.30.65 | Plug type | 5.6% |
| 8481.80.30.70 | Ball type | 5.6% |
| 8481.80.30.75 | Butterfly type | 5.6% |
| 8481.80.30.90 | Other | 5.6% |
| 8481.80.50 | Of other materials | 3% |
| 8481.80.50.40 | Pressure spray can valves | 3% |
| 8481.80.50.60 | Bath, shower, sink and lavatory faucets | 3% |
| 8481.80.50.90 | Other | 3% |
| 8481.80.90 | Other | 2% |
| 8481.80.90.05 | Solenoid valves | 2% |
| 8481.80.90.10 | Ballcock mechanisms | 2% |
| 8481.80.90.15 | Regulator valves, self-operating, for controlling variables such as temperature, pressure, flow and liquid level | 2% |
| 8481.80.90.20 | Control valves designed for proportional operation by a signal from a control device | 2% |
| 8481.80.90.25 | Other | 2% |
| 8481.80.90.30 | With hydraulic actuators | 2% |
| 8481.80.90.35 | Control valves designed for proportional operation by a signal from a control device | 2% |
| 8481.80.90.40 | Other | 2% |
| 8481.80.90.45 | With thermostatic actuators | 2% |
| 8481.80.90.50 | Other | 2% |
Keep this line
An account can watch this line, so a section 232 or 301 action naming it reopens the determination that rested on it.
2026HTSRev17, retrieved 2026-08-27, from the USITC