ECCN.DEV by Cancelli

6E003 Category 6E

Other “technology” as follows (see List of Items Controlled).

Category 6: Sensors and Lasers

Reasons for control

Country chart

ControlColumn
AT applies to entire entryAT 1
NS applies to entire entryNS 1

List-based license exceptions

ExceptionAs stated in the entry
TSR Yes

Items

  1. a. [Reserved]
  2. b. [Reserved]
  3. c. [Reserved]
  4. d. “Technology” as follows:
  5. d.1. “Technology” “required” for the coating and treatment of optical surfaces to achieve an 'optical thickness' uniformity of 99.5% or better for optical coatings 500 mm or more in diameter or major axis length and with a total loss (absorption and scatter) of less than 5 × 10−3;
  6. d.2. “Technology” for the fabrication of optics using single point diamond turning techniques to produce surface finish “accuracies” of better than 10 nm rms on non-planar surfaces exceeding 0.5 m 2;
  7. e. “Technology” “required” for the “development,” “production” or “use” of “specially designed” diagnostic instruments or targets in test facilities for “SHPL” testing or testing or evaluation of materials irradiated by “SHPL” beams;
  8. f. [Reserved]
  9. g. [Reserved]
  10. h. [Reserved]

Related controls

See also 6E993.

Notes

N.B.: See also 2E003.f.

Technical Note: For the purposes of 6E003.d.1, 'optical thickness' is the mathematical product of the index of refraction and the physical thickness of the coating.

Entries this one names (2)

Entries that name this one (1)

ECCNEntry
6E993 Other “technology”, not controlled by 6E003, as follows (see List of Items Controlled).

Source: eCFR, version 2026-08-18, retrieved 2026-08-26T15:38:31+00:00.