ECCN.DEV by Cancelli

1C007 Category 1C

Ceramic powders, ceramic “matrix” “composite” materials and 'precursor materials,' as follows (see List of Items Controlled).

Category 1: Special Materials and Related Equipment, Chemicals, “Microorganisms,” and “Toxins”

Reasons for control

Country chart

ControlColumn
AT applies to entire entryAT 1
MT applies to items in 1C007.c when the dielectric constant is less than 6 at any frequency from 100 MHz to 100 GHz for use in “missile” radomesMT 1
NS applies to entire entryNS 2

List-based license exceptions

ExceptionAs stated in the entry
GBS N/A
LVS $5,000, except N/A for MT and for 1C007.e

Items

  1. Items: a. Ceramic powders of titanium diboride (TiB2) (CAS 12045-63-5) having total metallic impurities, excluding intentional additions, of less than 5,000 ppm, an average particle size equal to or less than 5 µm and no more than 10% of the particles larger than 10 µm;
  2. b. [Reserved]
  3. c. Ceramic “matrix” “composite” materials as follows:
  4. c.1. Ceramic-ceramic “composite” materials with a glass or oxide-“matrix” and reinforced with any of the following:
  5. c.1.a. Continuous fibers made from any of the following materials:
  6. c.1.a.1. Al2O3 (CAS 1344-28-1); or
  7. c.1.a.2. Si-C-N; or
  8. c.1.b. Fibers being all of the following:
  9. c.1.b.1. Made from any of the following materials:
  10. c.1.b.1.a. Si-N;
  11. c.1.b.1.b. Si-C;
  12. c.1.b.1.c. Si-Al-O-N; or
  13. c.1.b.1.d. Si-O-N; and
  14. c.1.b.2. Having a “specific tensile strength” exceeding 12.7 × 10 3 m;
  15. c.2. Ceramic “matrix” “composite” materials with a “matrix” formed of carbides or nitrides of silicon, zirconium or boron;
  16. d. [Reserved]
  17. e. 'Precursor materials' “specially designed” for the “production” of materials controlled by 1C007.c, as follows:
  18. e.1. Polydiorganosilanes;
  19. e.2. Polysilazanes;
  20. e.3. Polycarbosilazanes;
  21. f. [Reserved]

Related controls

See also 1C107

Notes

Note: 1C007.c.1.a does not apply to “composites” containing fibers with a tensile strength of less than 700 MPa at 1,273 K (1,000 °C) or tensile creep resistance of more than 1% creep strain at 100 MPa load and 1,273 K (1,000 °C) for 100 hours.

N.B.: For items previously specified by 1C007.c see 1C007.c.1.b.

N.B.: For items previously specified by 1C007.d see 1C007.c.2.

Technical Note: For the purposes of 1C007, 'precursor materials' are special purpose polymeric or metallo-organic materials used for the “production” of silicon carbide, silicon nitride, or ceramics with silicon, carbon and nitrogen.

N.B.: For items previously specified by 1C007.f see 1C007.c.1.a.

Entries this one names (1)

Entries that name this one (8)

ECCNEntry
1C107 Graphite and Ceramic Materials, Other Than Those Controlled by 1C007, Which Can be Machined to Any of the Following Prod
1E001 “Technology” according to the General Technology Note for the “development” or “production” of items controlled by 1A002
1E002 Other “technology” as follows (see List of Items Controlled).
1E101 “Technology”, in accordance with the General Technology Note, for the “use” of commodities and “software” controlled by
1E103 “Technical data” (including processing conditions) and procedures for the regulation of temperature, pressure or atmosph
2E903 “Technology”, not specified elsewhere, for the “development” or “production” of 'coating systems' having all of the foll
9A010 “Specially Designed” “Parts,” “Components,” Systems and Structures, for Launch Vehicles, Launch Vehicle Propulsion Syste
9E003 Other “technology” as follows (see List of Items Controlled).

Source: eCFR, version 2026-08-18, retrieved 2026-08-26T15:38:31+00:00.