ECCN.DEV by Cancelli

1C118 Category 1C

Titanium-stabilized duplex stainless steel (Ti-DSS), having all of the following characteristics (see List of Items Controlled).

Category 1: Special Materials and Related Equipment, Chemicals, “Microorganisms,” and “Toxins”

Reasons for control

Country chart

ControlColumn
AT applies to entire entryAT 1
MT applies to entire entryMT 1

List-based license exceptions

ExceptionAs stated in the entry
GBS N/A
LVS N/A

Items

  1. Items: a. Having all of the following characteristics:
  2. a.1. Containing 17.0-23.0% by weight of chromium and 4.5-7.0% by weight of nickel;
  3. a.2. Having a titanium content of greater than 0.10% by weight; and
  4. a.3. A ferritic-austenitic microstructure (also referred to as a two-phase microstructure) of which at least 10% by volume (according to ASTM E-1181-87 or national equivalents) is austenite; and
  5. b. Having any of the following forms:
  6. b.1. Ingots or bars having a size of 100 mm or more in each dimension;
  7. b.2. Sheets having a width of 600 mm or more and a thickness of 3 mm or less; or
  8. b.3. Tubes having an outer diameter of 600 mm or more and a wall thickness of 3 mm or less.

Related controls

N/A

Entries that name this one (2)

ECCNEntry
1E101 “Technology”, in accordance with the General Technology Note, for the “use” of commodities and “software” controlled by
1E103 “Technical data” (including processing conditions) and procedures for the regulation of temperature, pressure or atmosph

Source: eCFR, version 2026-08-18, retrieved 2026-08-26T15:38:31+00:00.